*Coat In Any Season excludes application conditions in which humidity is higher than 85%, the air temperature is higher than 35 degrees or lower than 5 degrees or if rain or due is expected before the final coating is Rain Ready. 
** Depending on product applied and application conditions, the final coating may be Rain Ready* in as little as 2 hours. Rain Ready means that the product can withstand light rain on the day of application.
# The periods provided in the table below are a guide only for when the final coat will be Rain Ready

Coat after rain:

Rain the night before does not need to put you off the job in the morning, prepare as normal, wipe off excess water then allow at least 1 hour for the timber to dry. Intergrain UltraDeck can be applied while timber is still damp

Coat before rain:

A forecast of rain in the evening shouldn’t necessarily deter you from coating. Intergrain UltraDeck offers fast water resistance and can withstand light rain on the day of coating. Just use the table to ensure enough time has been allowed.

Coat up to 35 degrees:

Other waterbased coatings will dry too quickly to coat in high temperatures causing tackiness which makes it difficult to achieve a great finish. Intergrain UltraDeck has optimised open times meaning you can coat in conditions up to 35°C.

Note: air and surface temperatures need to be below 35°C. In hot conditions, coating out of direct sunlight or lightly wetting the timber to cool it down will help the open time as you apply, it is also recommended to coat in smaller sections.

Coat down to 5 degrees:

Intergrain UltraDeck offers guidance for coating all the way down to 5°C, coatings rely on evaporation to cure so coating in low temperatures will extend the recoat time.

Note: air and surface temperatures need to be above 5°C. The table shows times based on 5°C temperatures, the warmer it is, the quicker the coating will dry.