Showing {{SearchResultCount}} Results for: "{{SearchValue}}"
UltraGrip is an additive that, when mixed in to compatible coatings, provides a textured surface which reduces the tendency for decking and timber walkways to become slippery when wet. Compatible coatings include: UltraDeck Timber Stain, UltraDeck Timber Oil, and Heavy Duty. For a pre-mixed formula that gives a P4 Slip Rating in 2 coats, use UltraDeck Slip Resistant.
|
Fully cure: N/A
|
Clean up: Water
|
Sheen: N/A
|
|
Sizes: 200G, 500G
|
|
Areas
Decking, Stairs, Exterior timber, Interior timber floors, Ramps
|
|
Substrates
All exterior timber
|
|
Locations
Exterior
|
Methods: Mix UltraGrip with a Flat Blade Stirrer
1. Add 200g of UltraGrip per 4L of product.
2. UltraGrip must be added to each coat of UltraDeck Timber Oil, UltraDeck Timber Stain or Intergrain Heavy Duty.
3. Stir contents of the UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty can thoroughly with a flat blade stirrer.
4. To avoid spillage, remove 500ml of the timber coating from the can before adding UltraGrip.
5. While stirring, add the full container of UltraGrip slowly to avoid generating dust. Stir in UltraGrip thoroughly before, and during use, with a flat blade stirrer.
6. Add removed timber coating back to the can as space becomes available. Stir thoroughly.
7. IMPORTANT: Stir regularly with a flat blade stirrer during application to prevent settling.
8. Apply timber coating as specified on the UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty label instructions.
Methods: Mix UltraGrip with a Flat Blade Stirrer
1. Add 500g of UltraGrip per 10L of product.
2. UltraGrip must be added to each coat of UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty.
3. Stir contents of the UltraDeck Timber Oil, UltraDeck Timber Stain, or Heavy Duty can thoroughly with a flat blade stirrer.
4. To avoid spillage, remove 500ml of the timber coating from the can before adding UltraGrip.
5. While stirring, add the full container of UltraGrip slowly to avoid generating dust. Stir in UltraGrip thoroughly before, and during use, with a flat blade stirrer.
6. Add removed timber coating back to the can as space becomes available.
7. Stir thoroughly.
IMPORTANT: Stir regularly with a flat blade stirrer during application to prevent settling.
8. Apply timber coating as specified on the UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty label instructions.
Refer to UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty can for maintenance instructions.
IMPORTANT: UltraGrip must be added at the specified rate to each coat of UltraDeck Timber Stain, UltraDeck Timber oil or Heavy Duty.
){kind=logo}