Intergrain Enviropro Wet Edge Extender

Designed for professional applicators, Enviropro Wet Edge Extender is an additive used to increase the working time of Enviropro water based sealers and topcoats in hot conditions, or when applying large areas. Wet Edge Extender helps to overcome problems that could be caused by the coating drying too fast, including poor levelling and the presence of lap marking.

Fully cured: N/A
Clean up: Water
Sheen: None
Sizes available: 1L
   
Add 5% of Wet Edge Extender to the selected Enviropro product. For example, if using 1 litre of Endure, 50mL of Wet Edge Extender would be required.
Shake the final solution for 2 minutes to incorporate Wet Edge Extender into the selected Enviropro product.
Note: Wet Edge Extender increases the drying time of the coating, therefore, a longer time before overcoating will be required under certain conditions.
Methods: Shake or stir to incorporate

1. Add up to 5% Wet Edge Extender by volume into the selected Enviropro water based sealer or topcoat. For example, if using 1 litre of Enviropro Endure, 50mL of Wet Edge Extender as a maximum can be added.
2. Shake or stir for 2 minutes to incorporate Wet Edge Extender into the selected product.
Areas: Parquetry, Timber floors, Stairs

Substrates: All interior timber

Locations: Interior