Exterior/ Interior
Product Range
Product Range
Will UltraGrip affect coating durability?
For Exterior/Interior Timber
UltraGrip™
A slip resistant additive that has been formulated for use in UltraDeck , NaturalStain and UltraFloor to provide a high performance, long lasting, textured finish. When added to UltraDeck and NaturalStain, UltraGrip will reduce the tendency for decking and timber walkways to become slippery when wet. When added to UltraFloor Satin, UltraGrip will provide a slip resistant surface for timber stairs and floors.
Where To UseUse on all decking and exterior timber walkways in UltraDeck and NaturalStain. Use on interior timber floors and stairs in UltraFloor Satin. Gloss Level
N/A
Preparation
Preparation is the key to long lasting, professional looking results. Click here for how to prepare an exterior timber surface before coating, and here for preparing a timber floor.
Preparation is the key to long lasting, professional looking results. Click here for how to prepare an exterior timber surface before coating, and here for preparing a timber floor.
No. of Coats Required
Refer to UltraDeck, NaturalStain or UltraFloor. UltraGrip must be added to each coat of the timber finish.
Refer to UltraDeck, NaturalStain or UltraFloor. UltraGrip must be added to each coat of the timber finish.
Sand Between Coats
No.
No.
Clean Up With
Water.
Water.
Packaging Sizes
200g, for use in 4L of UltraDeck, NaturalStain or UltraFloor, and 500g for 10L of UltraDeck, NaturalStain or UltraFloor.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
200g, for use in 4L of UltraDeck, NaturalStain or UltraFloor, and 500g for 10L of UltraDeck, NaturalStain or UltraFloor.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
*Coverage rates are subject to variation between different timber species. To ensure adequate timber protection, this coverage should not be exceeded.
