Interior
Product Range
Product Range
Why are water based timber finishing products better?
For Interior Timber
UltraFloor™
An extra tough, clear, water based polyurethane timber flooring finish. UltraFloor has a low odour and is fast drying, enabling floors to be finished within one day. UltraFloor preserves the natural colour of the timber and, unlike oil based finishes, will not darken or yellow. With Enviropro commercial flooring technology, UltraFloor has excellent resistance to abrasion, water, alcohol and most household chemicals. Where To Use On all interior timber, parquetry and cork flooring. Gloss Level
Gloss or Satin
Preparation
Preparation is the key to long lasting, professional looking results. Click here for how to prepare the timber surface before coating.
Preparation is the key to long lasting, professional looking results. Click here for how to prepare the timber surface before coating.
Apply With
Brush or applicator.
Brush or applicator.
No. of Coats
Three coats. Four coats if desired for high traffic areas.
Three coats. Four coats if desired for high traffic areas.
Recoat Time
Allow a minimum 4 hours at 25°C. Cold or humid conditions will require longer.
Allow a minimum 4 hours at 25°C. Cold or humid conditions will require longer.
Drying Time
Touch Dry: 2 hours at 20°C and 50% relative humidity. UltraFloor will tolerate light traffic after 12 hours and normal traffic after 72 hours. Full curing 7 days.
Touch Dry: 2 hours at 20°C and 50% relative humidity. UltraFloor will tolerate light traffic after 12 hours and normal traffic after 72 hours. Full curing 7 days.
Coverage Rate m2/L
10-12 square metres per litre depending on the porosity of the timber.
10-12 square metres per litre depending on the porosity of the timber.
Sand Between Coats
If necessary, sand lightly between coats to remove any raised grain.
If necessary, sand lightly between coats to remove any raised grain.
Clean Up With
Water
Water
Packaging Sizes
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
*Coverage rates are subject to variation between different timber species. To ensure adequate timber protection, this coverage should not be exceeded.
