Interior
Product Range
 
What are UV absorbers?
 

For Interior Timber
UltraClear™ Interior
 
Product ImageA tough, water based, interior clear finish incorporating UV absorbers to give greater protection against darkening and yellowing of the timber. UltraClear is low odour, quick drying and easy to apply. UltraClear can be tinted to create a ‘one step’ stain and varnish that adds colour to timber whilst also providing a protective, durable clear top coat. Where To Use
Use on all interior timber including doors, windows, furniture and joinery.

Note: UltraClear Interior is not suitable for heavy wear surfaces (such as floors), for these areas use UltraFloor.
 Gloss Level
Gloss or Satin

 
Preparation
Preparation is the key to long lasting, professional looking results. Click here for how to prepare the timber surface before coating.
 
Apply With
Brush or spray.
 
No. of Coats
Minimum of two coats.
 
Recoat Time
Allow 3 hours drying at 25°C.
 
Drying Time
Touch Dry: 1 hour at 25°C and 50% humidity. Full curing 7 days.
 
Coverage Rate m2/L
10-12 square metres per litre depending on the porosity of the timber.
 
Sand Between Coats
If necessary, sand lightly between coats to remove any raised grain.
 
Clean Up With
Water
 
Packaging Sizes
1, 4 and 10L.

Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
 
*Coverage rates are subject to variation between different timber species. To ensure adequate timber protection, this coverage should not be exceeded.



interior projects