Preparation
Product Range
Product Range
Should TSS be washed off?
For Preparing Timber
TSS™
A treatment for use on interior and exterior timber and painted surfaces in humid, tropical and mould susceptible areas. TSS prevents the growth of most mould species and is ideal for use under Intergrain Timber Finishes.
Note: Lack of visible growth does not necessarily indicate an uncontaminated surface. Many spores are not visible to the naked eye and can germinate and grow through surface coatings and timber stains.
Where To Use On all interior and exterior timber, new, bare or painted surfaces that may be susceptible to, or already contaminated by mould. Gloss Level
N/A
Preparation
N/A
N/A
Apply With
Brush, Spray, Sponge or Rag.
Brush, Spray, Sponge or Rag.
No. of Coats Required
1 coat.
1 coat.
Recoat Time
24 hours
24 hours
Drying/curing Time
24 hours
24 hours
Coverage Rate m2/L
Rough Sawn Timber 2-5mē per litre
Sawn Timber 5-7mē per litre
Dressed Timber 7-10mē per litre
Rough Sawn Timber 2-5mē per litre
Sawn Timber 5-7mē per litre
Dressed Timber 7-10mē per litre
Sand Between Coats
N/A.
N/A.
Clean Up With
Water.
Water.
Packaging Sizes
1, 4L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
1, 4L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
*Coverage rates are subject to variation between different timber species. To ensure adequate timber protection, this coverage should not be exceeded.
