Preparation
Product Range
Product Range
Can Reviva remove tannins from pavers?
For Preparing Timber
Reviva®
A high strength cleaner that restores grey, rust or tannin stained, mould or mildew affected timber to a clean appearance suitable for coating. Reviva is also used to clean and prepare new timber for coating by removing the dirt, tannins, oils and other contaminants that are present. Reviva has a non-bleaching formula and contains oxalic acid, which is a naturally occurring, bio-degradable organic acid. Where To UseOn all exterior timber including decking, outdoor furniture, weatherboards, pergolas, window frames, trim, fences and marine timbers. Gloss Level
N/A
Preparation
N/A
N/A
Apply With
Stiff bristle brush or stiff bristle broom.
Stiff bristle brush or stiff bristle broom.
No. of Coats Required
Normally 1 application. Severe stains, discolouration and tannin rich timbers such as Merbau may require a stronger or repeated application.
Normally 1 application. Severe stains, discolouration and tannin rich timbers such as Merbau may require a stronger or repeated application.
Recoat Time
N/A
N/A
Drying/curing Time
N/A
N/A
Coverage Rate m2/L
1 litre diluted with 4 litres of water covers 5-10 square metres.
1 litre diluted with 4 litres of water covers 5-10 square metres.
Sand Between Coats
N/A.
N/A.
Clean Up With
Water.
Water.
Packaging Sizes
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
