Exterior
Product Range
Product Range
What should I use on outdoor timber furniture?
For Exterior Timber
Nature's Timber Oil™
Natural, semi transparent, penetrating oil for timber decking and garden furniture. Contains Tung Oil, a natural wood oil that penetrates deep into timber providing excellent durability. Nature’s Timber Oil is fast drying, so application can be completed within one day and it will not crack, peel or blister as it weathers. Consists of 98% naturally derived and sustainable raw materials from renewable resources. Where To UseOn all exterior timber including decking, walkways, railings, garden furniture, rough sawn weatherboards, shingles and fences. Gloss Level
Matt.
Preparation
Preparation is the key to long lasting, professional looking results. Click here for how to prepare the timber surface before coating.
Preparation is the key to long lasting, professional looking results. Click here for how to prepare the timber surface before coating.
Apply With
Brush or applicator.
Brush or applicator.
No. of Coats Required
Two coats. Apply the second coat and wipe off excess oil after 15-30 mins. Do not allow the second coat to become tacky before removing excess.
Two coats. Apply the second coat and wipe off excess oil after 15-30 mins. Do not allow the second coat to become tacky before removing excess.
Recoat Time
4 hours
4 hours
Drying/curing Time
Touch Dry: 30 minutes at 25°C.
Decking can be walked on after 12 hours. Full curing 7 days.
Touch Dry: 30 minutes at 25°C.
Decking can be walked on after 12 hours. Full curing 7 days.
Coverage Rate m2/L
6-10 square metres per litre depending on the porosity of the timber.
6-10 square metres per litre depending on the porosity of the timber.
Sand Between Coats
No.
No.
Clean Up With
Hot soapy water or mineral turpentine.
Hot soapy water or mineral turpentine.
Packaging Sizes
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
*Coverage rates are subject to variation between different timber species. To ensure adequate timber protection, this coverage should not be exceeded.
