Preparation
Product Range
Product Range
Can I make Liquid 8 work faster?
For Preparing Timber
Liquid8®
A fast acting, easy to use, water soluble gel timber finish and paint remover. Liquid 8’s low odour and non-drip, citrus based gel formula allows for safe and easy application on all horizontal and vertical surfaces. With excellent softening and penetration, it quickly and effectively removes most water and solvent based coatings including marine, automotive and industrial paints, acrylics, polyurethanes and varnishes. Liquid 8 is gentle on the surface and will not darken timber like some traditional strippers. Where To UseUse on all interior and exterior timber, metal, brick and masonry surfaces. Gloss Level
N/A
Preparation
N/A
N/A
Apply With
Brush.
Brush.
No. of Coats Required
Normally one heavy coat. However stubborn paints may require a 2nd application.
Normally one heavy coat. However stubborn paints may require a 2nd application.
Recoat Time
20 – 60 mins
20 – 60 mins
Drying/curing Time
N/A
N/A
Coverage Rate m2/L
Approximately 4 square metres per litre.
Approximately 4 square metres per litre.
Sand Between Coats
N/A.
N/A.
Clean Up With
Water.
Water.
Packaging Sizes
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
1, 4 and 10L.
Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project.
